Zyxel router admin interface provides access to modify WiFi password, network name (SSID), establish guest networks, and configure various system settings at http://192.168.1.1.
How to login to Zyxel router?
- Launch a web browser and navigate to http://192.168.1.1 in the address bar.
- Enter the default Username: admin and Password: 1234 and click Login.
- You will gain access to the Zyxel router management interface.
How to Change Zyxel WiFi Password and SSID?
- Open your web browser and type http://192.168.1.1 in the address bar.
- Input the default Username: admin and Password: 1234 and click Login.
- Navigate to Network Settings > Wireless from the top-right menu.
- Enter your preferred Wireless Network Name (SSID) in the designated field.
- Under Security Level, select Security Mode as WPA2-PSK and input the new WiFi Password.
- Click Apply to save and implement the settings.
To configure 2.4GHz and 5GHz wireless bands independently, disable the “Keep the same settings for 2.4G and 5G wireless networks” option.
Troubleshooting Access Issues
If you cannot access your Zyxel router at 192.168.1.1, try these solutions:
- Verify your device is connected to the Zyxel router’s network via WiFi or Ethernet cable.
- Check that you’re typing the correct IP address: 192.168.1.1 (not 192.168.l.1 with letter ‘l’).
- Clear your browser’s cache and cookies, then attempt access again.
- Try using a different web browser or disable browser extensions temporarily.
- Ensure no VPN or proxy is interfering with local network access.
- Restart your router by unplugging it for 30 seconds, then reconnecting power.