PLDT Router Login

PLDT router admin interface provides access to WiFi settings, network configuration, and security options at http://192.168.1.1.

How to Login to PLDT Router?

You can easily change your WiFi Name and Password through the admin dashboard by following these steps:

  1. On your browser, type http://192.168.1.1
  2. Enter admin as the default username and 1234 as the default password.pldt router login
  3. Click Login to access the router administration panel.

How to Change PLDT Router WiFi Password and SSID?

To change your WiFi Name:

  1. Go to Basic then tap Wireless LAN (WLAN) Settings
  2. Go to SSID Name
    PLDT Router Change Wifi SSID
  3. Type your preferred WiFi name in the box provided
  4. Click Apply Changes and Save

To change your WiFi Password:

  1. Go to Wireless LAN (WLAN) Settings
  2. Select Security
    PLDT Router Change Wifi Password
  3. Go to Encryption/Security Mode and select WPA2-MIXED
  4. Go to Pre-shared Key
  5. Type your preferred WiFi password in the box provided
  6. Click Apply Changes to save settings.

If this is your first time using the admin dashboard, you will be prompted to change the default username and password under the Account Management section. On the same page, you will also see the available fields where you can change your SSID Name or WiFi Name and WiFi Password.

Troubleshooting Connection Issues

If you have no internet connection using your Fiber, follow this simple checklist to troubleshoot your internet connection:

  • Make sure that you are up to date with your account and you have no outstanding balance.
  • Turn your modem ON and check if the POWER light indicator is steady green. If not, make sure that the modem is properly plugged in and check if there are any loose or damaged cables.
  • Ensure that both ends of the patch cord is properly connected to the fiber optic slot at the back of the modem, and to the small box called the Inner Optical Outlet. The PON light indicator should be steady green if the patch cord is connected properly.
  • Check your connection type: If you are connected via WiFi, WLAN 2.4 GHz or 5 GHz light indicator should be steady green or blinking during data transmission. If you are using LAN cable, the LAN light indicator should be steady green or blinking. Ensure WiFi is enabled or LAN cable is not damaged.
  • Verify the INT/INTERNET light indicator is blinking slowly or fast when browsing. If any light indicators are not in their normal state, turn your modem OFF for 5 minutes and then back ON to re-sync your modem with our network.