PIX-LINK repeaters provide web-based management through http://myrepeater.net or http://192.168.1.254 for configuring WiFi settings and network options.
How to Login to PIX-LINK Repeater?
- Connect your device to the PIX-LINK MiNi Router using an Ethernet cable or wirelessly through the router’s network (wireless-AC or wireless N(2.4G)).
- Open your web browser and type http://myrepeater.net or http://192.168.1.254 in the address bar.
- A login page will display. Choose your preferred language from the dropdown menu and enter admin in the password field.
- Click the Submit button to access the PIX-LINK administration panel.
How to Configure PIX-LINK Wireless Repeater Mode?
The PIX-LINK MiNi Router supports four operation modes: Gateway Mode, Wireless AP Mode, Wireless Repeater Mode, and WISP Mode. To configure wireless repeater functionality:
- Access your PIX-LINK admin panel and click the Wizard button.
- Select “Wireless Repeater Mode” as the operation mode and click Next.
- The device will automatically scan nearby wireless networks. Choose the network whose signal you want to extend from the available list.
- Enter your desired Repeater SSID in the designated field, then input the existing network’s WiFi password in the Security Key field.
- Click Apply to save the configuration. The router will restart automatically, allowing connection to the extended network using your original network password.
Troubleshooting Connection Issues
If you cannot access the PIX-LINK repeater interface, try these solutions:
- Verify your device is properly connected to the PIX-LINK network via Ethernet or WiFi.
- Clear your browser cache and cookies, then attempt access again.
- Try using a different web browser (Chrome, Firefox, Safari, or Edge).
- Ensure the repeater is powered on and all LED indicators are functioning normally.
- If myrepeater.net doesn’t work, use the direct IP address 192.168.1.254.
- Temporarily disable firewall or antivirus software that might block the connection.