Hotspot.webui

Hotspot.webui serves as the management interface for configuring WiFi settings, network names, and AT&T Turbo Hotspot 2 device preferences at http://hotspot.webui.

How to login to Hotspot.webui?

  1. Launch your web browser and navigate to http://hotspot.webui in the address bar.
  2. Input your device password in the login field and click Login.
    Hotspot.webui login
  3. You will gain access to the Hotspot.webui management dashboard.

Note: Your admin password consists of the final 8 digits from your device’s IMEI code, located on the battery compartment label. The IMEI number can also be found in your device’s Details menu. Ensure your computer or mobile device is connected to the AT&T Turbo Hotspot wireless network before attempting to access the admin interface.

How to change Network Name (SSID) and Wi-Fi Password?

  1. Access the WebUI management panel using the steps above.
  2. Navigate to Wi-Fi Settings > Basic Wi-Fi Configuration.
    Hotspot.webui change WiFi name and password 1
  3. Type your desired network name in the SSID (Network Name) field.
    Hotspot.webui change WiFi name and password 2
  4. Create a new password in the Wireless Password field.
  5. Select Apply Changes and confirm by clicking Yes.

Both 2.4 GHz and 5 GHz wireless bands can be configured independently or disabled as needed. The wireless network will automatically restart to implement your new settings.

Troubleshooting Access Issues

If you cannot access hotspot.webui, try these solutions:

  • Ensure your device is connected to the AT&T Turbo Hotspot network.
  • Double-check that you’re using the correct last 8 digits of the IMEI number.
  • Delete cookies and browsing data, then try again.
  • Test with Chrome, Firefox, or Safari if one doesn’t work.
  • Ensure the hotspot device is powered on and functioning normally.
  • Power off the hotspot for 10 seconds, then turn it back on.