192.168.254.254 is a private IP address commonly used by ISP-provided routers and modems as the default gateway for accessing administrative settings and managing WiFi configurations, such as Globe At Home and PLDT routers.
How to login to 192.168.254.254?
Follow these steps to access your router’s admin interface:
- Open your web browser and type http://192.168.254.254 in the address bar, then press Enter.
- A login window will appear requesting your authentication details.
- Enter the default username and password for your specific router brand.
- Click “Login” or “Sign In” to access the router settings page.
Default Username and Password for 192.168.254.254
| ISP/Brand | Username | Password |
|---|---|---|
| Globe At Home | user | admin@l03e1t3 |
| Globe At Home (Alt) | admin | admin |
| PLDT | admin | 1234 |
| Frontier | admin | Check router label |
Note: The login information is typically printed on a sticker located on the back or bottom of your modem/router. Always check this label first for device-specific password details.
How to Change WiFi Password and Network Name
- Access the router interface by navigating to http://192.168.254.254 in your browser.
- Log in using your default username and password.
- Navigate to “Advanced,” “Setup,” or “Wireless” tab depending on your interface.
- Look for “WiFi Settings,” “WLAN,” or “Wireless Security” options.
- Enter your preferred Wi-Fi name in the SSID or Network Name field.
- Choose WPA2-PSK or WPA3 as your security mode for better protection.
- Input a strong Wi-Fi password in the passphrase or key field.
- Click “Save,” “Apply,” or “Update” to implement the changes.
How to Find Your Router’s Default IP Address
To confirm your router’s management IP address, follow these device-specific steps:
Windows:
- Press Windows + R keys and type “CMD,” then hit Enter to open Command Prompt.
- Type “ipconfig” and press Enter.
- Look for “Default Gateway” in the results – this IP address is your router’s management interface.
Mac:
- Go to Utilities and open Terminal.
- Type “netstat -nr | grep default” and press Enter.
- The IP address next to “default” is your router’s gateway address.
Factory Reset Instructions
If you’re locked out and need to restore default settings:
- Locate the reset button on your modem/router (usually small and recessed).
- With the device powered on, press and hold the reset button using a paperclip.
- Continue holding for 15-30 seconds until indicator lights change.
- Release the button and allow the device to restart completely.
- Use the default username and password from the table above to log in.
Warning: Factory reset will erase all custom settings including WiFi names, passwords, port forwarding, and parental controls. Document important configurations before proceeding.