192.168.1.128

192.168.1.128 is an IP address for accessing router admin panels on select ZTE, TP-Link, and Tenda models to modify WiFi settings and configurations.

How to login to 192.168.1.128?

  1. Launch your web browser and type http://192.168.1.128 in the address bar.
  2. Input the required username and password when prompted, then click Login.
  3. You will successfully access the router’s administrative interface.

Note: Username and password information is typically printed on a label attached to your router’s back panel. If unavailable, consult the instruction manual included with your router package.

How to Change WiFi Password and Network Name (SSID)?

ZTE Routers:

  1. Access your browser and log into the router interface using the steps above.
  2. Navigate to Network > WLAN > SSID Settings.
  3. Type your preferred Network Name in the SSID Name field and click Submit.
  4. Choose Security from the WLAN menu options.
  5. Enter your new WiFi Password in the WPA Passphrase field.
  6. Click Submit to save and apply the configuration changes.

TP-Link Routers:

  1. Sign into the router settings using the login procedure described earlier.
  2. Access Wireless > Wireless Setting from the main menu.
  3. Input your desired Network Name (SSID) and Password, then click Save.
  4. Note: On certain TP-Link models, SSID configuration appears under Basic Settings while password options are located in Wireless Security Settings.

Tenda Routers:

  1. Open the Tenda router interface and provide the required login password.
  2. Navigate to Wi-Fi Settings > Wi-Fi Name & Password.
  3. Enter your preferred Wi-Fi Name and select WPA/WPA2-PSK as the Encryption Mode.
  4. Input your new Wi-Fi Password and click the Save button.
  5. Alternative: Some Tenda models display Wireless options on the homepage where you can enter Network Name (SSID) and password in the WPA Pre-Shared Key field.

Troubleshooting Connection Issues

If you cannot access 192.168.1.128, try these solutions:

  • Ensure your device connects to the router’s network.
  • Confirm 192.168.1.128 is your router’s correct gateway address.
  • Remove cookies and cached data that might cause conflicts.
  • Switch to another web browser if issues persist.
  • Connect directly via cable for more stable access.
  • Power cycle your router and wait 30 seconds before reconnecting.