192.168.1.100

192.168.1.100 is a private IP address that may be used to access router or network device settings in specific configurations. While not a standard default gateway address, this IP can be encountered when routers have been manually configured with custom management interfaces, or when accessing secondary network devices like access points, repeaters, or managed switches within a 192.168.1.x network range.

How to login to 192.168.1.100?

Follow these steps to access the device admin panel:

  1. Ensure your device is connected to the same network as the target equipment.
  2. Open a web browser (Chrome, Firefox, Safari, or Edge).
  3. Type http://192.168.1.100 in the address bar and press Enter.
  4. Enter the username and password when prompted by the login page.
  5. Click “Login” or “Sign In” to access the device settings.

Note: Verify you’re typing the correct IP address – 192.168.1.100 not 192.168.l.100 (with letter ‘l’) or any other variation with letters. IP addresses contain only numbers and periods.

Default Username and Password for 192.168.1.100

Important: The default router IP address, username, and password are typically printed on a sticker on the back of your modem/router.

Username Password Common Device Types
admin admin Most routers and access points
admin password NETGEAR, some Linksys models
admin (blank) D-Link, some older routers
admin 1234 Some basic networking equipment

When You Might Encounter 192.168.1.100

  • Custom Router Configurations: Administrators who manually change default management IPs
  • Secondary Network Devices: Wi-Fi extenders, access points, or repeaters
  • Managed Switches: Network switches with web-based management interfaces
  • Print Servers: Network print servers or multifunction devices
  • IP Cameras: Security cameras with web-based configuration panels
  • NAS Devices: Network-attached storage systems

How to Change Wi-Fi Password and Network Name?

If 192.168.1.100 belongs to a wireless router or access point, follow these steps:

Change Wi-Fi Network Name (SSID):

  1. Log into the device settings using the steps above.
  2. Navigate to “Wireless,” “Wi-Fi Settings,” or “WLAN” section.
  3. Locate the “Network Name,” “SSID,” or “Wi-Fi Name” field.
  4. Enter your preferred network name in the SSID field.
  5. Click “Save,” “Apply,” or “Update” to confirm changes.

Change Wi-Fi Network Password:

  1. Access the wireless security settings section.
  2. Go to “Wireless Security,” “Wi-Fi Security,” or “Security Settings.”
  3. Select “WPA2-PSK” or “WPA3” encryption for optimal security.
  4. Enter your new password in the “Wi-Fi Password,” “Passphrase,” or “Pre-Shared Key” field.
  5. Click “Save” or “Apply” to implement the changes.

Dual-Band Networks: If your device supports dual-band networks, you’ll need to configure both 2.4 GHz and 5 GHz settings separately.

Cannot Access 192.168.1.100?

If you’re unable to reach the device interface, try these troubleshooting steps:

  • Ensure your device is connected to the correct network.
  • Confirm the target device is powered on and functioning.
  • Use command prompt to ping 192.168.1.100 and verify connectivity.
  • Test with alternative web browsers.
  • Delete cookies, cache, and browsing history.
  • Temporarily disable firewall or antivirus software.
  • Verify your computer is in the same IP range (192.168.1.x).

Finding the Correct IP Address

If 192.168.1.100 doesn’t work, find your router’s actual management IP:

  • Windows: Open Command Prompt, type ipconfig, look for “Default Gateway”
  • Mac: System Preferences > Network > Advanced > TCP/IP tab
  • Linux: Terminal command ip route | grep default
  • Router Label: Check the sticker on your router for the default IP address

Reset Device Password

If you’ve forgotten the device admin password:

  1. Check the device label for default login information.
  2. Consult the user manual or manufacturer’s website.
  3. Locate the reset button on the device (usually a small recessed button).
  4. Press and hold the reset button for 10-15 seconds using a paperclip.
  5. Release the button and wait for the device to reboot completely.
  6. Use the default username and password from the device label.

Warning: Factory reset will erase all custom configurations including Wi-Fi passwords, security settings, and network configurations. Document important settings before performing a reset.