192.168.1.20 is the default IP address for Ubiquiti Networks airOS devices to configure WiFi settings and manage network parameters.
How to login to 192.168.1.20?
- Open your web browser and navigate to http://192.168.1.20 in the address bar.
- Enter “ubnt” in both the Username and Password fields.
- Click “Login” to access the airOS Configuration Interface.
Note: If you’re using an airRouter model, the default IP address is 192.168.1.1 instead. The airOS Configuration Interface supports M Series products including NanoBridge, NanoStation, and Nano Power Beam devices.
How to change WiFi Password and SSID (Network Name)?
- Access the airOS configuration interface using the login steps above.
- Navigate to Wireless from the top navigation menu.
- Under Basic Wireless Settings, enter your desired network name in the SSID field.
- In the Wireless Settings section, select WPA2-AES as your Security method.
- Input your new password in the WPA Preshared Key field.
- Click Change to apply and save the settings.
Ubiquiti Device Models Using 192.168.1.20
| Device Series | Model Examples | Default IP |
|---|---|---|
| NanoStation | NSM2, NSM5, NS-5AC | 192.168.1.20 |
| NanoBridge | NBM3, NBM5, NBE-5AC | 192.168.1.20 |
| PowerBeam | PBE-M2, PBE-M5, PBE-5AC | 192.168.1.20 |
| airRouter | airRouter, airRouter HP | 192.168.1.1 |
Troubleshooting Access Issues
If you cannot connect to 192.168.1.20, try these solutions:
- Verify your computer is connected to the Ubiquiti device via Ethernet cable.
- Check that your network adapter is set to obtain an IP address automatically (DHCP).
- Try accessing 192.168.1.1 if you have an airRouter model.
- Disable any VPN or proxy connections that might interfere with local network access.
- Clear your browser cache and cookies, then attempt to reconnect.
- Use a different web browser to rule out browser-specific issues.